Resources page removed

Due to lack of input from others I have removed the resources page, if some comes in I can easily reinstate. 

Resources page

It will be 2 weeks tomorrow that I posted an announcement regarding the "Resources Page" here and elsewhere. So far there have been no comments or recommendations. If none are forthcoming, I will delete the "Resources page" next week.

Old web site no longer available the new one is active.

www.achillesyachts.co.uk/ and achillesyacht.blogspot.com/ should now both take you to this site. 

If it does not work right now (15:00 UCT Friday 3/12/21) check the URL, if its right try again tomorrow, it could just be a delay in updating the DNS server you are using.

If your "favourites"  link includes a page ID e.g. http://www.achillesyachts.co.uk/pagenn that will not work.

if the http:// prefix is used it will automatically be changed to https://

Web site resources page:

Following a suggestion on Flickr I have put up a trial page for supplier recommendations. I have put mine on as a starting point, please review, comment and add your recommendations. If I get a reasonable number from several people I'll leave the page there, if there is little interest I will remove it.

A24 600 "Flying Kipper" undergoing refurbishment.

By João Américo Patrão

My Achilles was purchased in Poole Yacht Brokers in 2008, came to Portugal by ferry boat via San Sebastian in Spain, the person who bought it then brought it to Portugal towed by a car, the boat had another name "Dolphin UK", but I decided to take it back to its first name "Flying Kipper", I think the names of the boats should not be changed.

In 2013 I bought the boat and for about 2 years I have been doing a total restoration.

The boat has never been on the water since it came from the uk, I'm working to get it to go to this sea of ours in 2022.

Yet more changes to reporting requirements leaving or arriving in UK (including to / from IRE)

 All change again and now including NI - Ireland

Notice 8: sailing your pleasure craft to and from the UK - GOV.UK (www.gov.uk)

Protect your P bracket!

This may be an unusual problem as I have not found other owners who have experienced it, perhaps they have been lucky, but Sancerre's bronze P bracket was rotting from galvanic action to the extent that small pieces could easily be removed with a screw driver. Fortunately the damage was limited to the front of the lower "hub" section, its structural integrity was not affected and after grinding the degraded material away the cutlass bearing could be refitted with no play in it.

One of the pair of P-Bracket anodes after just one
year before I fitted a galvanic isolator. Those on
the shaft were also heavily eroded.

The likely cause was dodgy marina shore power connections (if the marina has not got properly earthed connections your anodes can be eroded by any boat in the area as well as your own), this would not have been helped by the the P bracket not being bonded to the engine. The later can't easily be fixed so after finding the problem I put a small disk anode on each side of the bracket, after just one year this was severely eroded but did its job protecting the bronze, so that is the quick and fairly cheap fix.

For 2021 I installed a galvanic isolator in the mains power system, always a good idea but not something I had got round to doing, I also renewed the "P" bracket anode and to be on the safe side I replaced the wiring for the bilge pump which had a set of connecters that could have rested in bilge water. 

Hopefully the problem is now sorted, I shall find out when I get to check the anodes when the boat is lifted but when I dived on the boat in August all of the anodes looked to be in far better shape than I would have expected in previous years.